PP (Polypropylene). Area of Application. thermoformingscreen printingoffset printingdigital printingmechanical processinghot sealing Additional Equipment. UV stabilisation heavy inflame retardant with mineral fillers corona treatment Features. Better mechanical properties (stiffness, hardness and strength) than PE, but lower notch impact strength. Resistant to alcohol, weak organic acids and alkali solutions. Contact. We gladly advise you on implementing of your projects. Request your quote here! Request a Quote Types. PP-H (Homopolymer) permanent-heat resistant permanent-heat resistance also at high temperatures food conformity EU10/2011 + FDA temperature range: 0° C – 100° C PP-C (Block Co-polymer) increased impact strength compared to PP-H also at low temperature reduced stress-cracking sensitivity temperature range: -20° C – 80° C PP-R (Random-Co-polymer) high impact strength as PP-H also at low temperature high flexibility temperature range: -20° C – 80° C PP-EL (electrically conductive) electrical conductivity on request 103 – 107 high permanent-heat resistance 5° C – 100° C Variants. PP with fillers (up to 50%) talc calcium carbonate PP-Regenerate Material PP Production Programme. Thicknesses and Widths: sheet thicknesses: from 0.8 – 6.0 mm roll thicknesses: from 0.6 – 2.5 mm sheet widths: from 380 – 1,500 mm roll widths: from 380 – 1,500 mm sheet lengths: from 400 – 3,000 mm mono-extrusion, co-extrusion, blends, finishing and cuts Colours of Sheets and Foils: natural, black, white and coloured according to RAL, Pantone, HKS or sample pattern Surfaces machine-finished on both sides various grains also on both sides available decors Corona Treatment on one or both sides Protective Films on one or both sides